Home / Products / Nickel Alloys / Incoloy 800 / ASTM B358 Incoloy 800 Welded Pipe
The demand of offered welded pipes is at peak as these are alloyed with molybdenum and nitrogen, which enhances their ability of resistance against corrosion. In addition to this, we make use of nitrogen alloyed chloride resistant grades in the manufacturing of these welded pipes. We also weld pipes with filler metal and further heat treat these.
ASTM B358 Incoloy 800 Welded Pipe
Specifications
| Standards | Designation |
| ASTM | B 358 |
| ASME | SB 358 |
| UNS | N08800/10/11 |
| Werkstoff Nr. | 1.4876/4958/59 |
ASTM B358 Incoloy 800 Welded Pipe Inventory Stock at factory rate:-
| NB Sizes | Sch 5 | Sch 10 | Sch 40 | Sch 80 | Sch 160 |
|---|---|---|---|---|---|
| 1/8″ |  |
|
|
|
|
| 1/4″ | |
|
|
|
|
| 3/8″ | |
|
|
|
|
| 1/2″ | |
|
|
|
|
| 3/4″ | |
|
|
|
|
| 1″ | |
|
|
|
|
| 1 1/4″ | |
|
|
|
|
| 1 1/2″ | |
|
|
|
|
| 2″ | |
|
|
|
|
| 2 1/2″ | |
|
|
|
|
| 3″ | |
|
|
|
|
| 4″ | |
|
|
|
|
| 5″ | |
|
|
|
|
| 6″ | |
|
|
|
Dimensions
Chemical Composition
| Incoloy | 800 | 800H | 800HT |
| Ni | 30-35 | 30-35 | 30-35 |
| Fe | 39.5 min | 39.5 min | 39.5 min |
| Cr | 19-23 | 19-23 | 19-23 |
| Cu | 0.75 max | 0.75 max | 0.75 max |
| Ti | 0.15-0.60 | 0.15-0.60 | 0.25-0.60 |
| Al | 0.15-0.60 | 0.15-0.60 | 0.85-1.20 |
| C | 0.1 max | 0.05-0.1 | 0.06-0.1 |
| Mn | 1.5 max | 1.5 max | 1.5 max |
| S | 0.015 max | 0.015 max | 0.015 max |
| Si | 1.0 max | 1.0 max | 1.0 max |
Mechanical & Physical Properties – Incoloy 800
| Density | 7.94 g/cm3 |
| Melting Point | 1385 °C (2525 °F) |
| Tensile Strength | Psi – 75,000 , MPa – 520 |
| Yield Strength (0.2% Offset) | Psi – 30,000 , MPa – 205 |
| Elongation | 30 % |
Main Export Market
- Eastern Europe
- North America
- Mid East/Africa
- Central/South America
- Asia
- Western Europe
- Australasia
- UAE
U.A.E,
Oman,
Saudi Arabia,
Qatar,
Bahrain,
Egypt,
Turkey
Singapore,
Thailand,
Malaysia
Indonesia
Poland
Italy
Portugal
Spain
Brazil
Chile
Venezuela
Costa Rica
USA
Canada
Angola
Sri Lanka
Russia
